Abstract: There is a current problem in the DOE supported Integrated Bio refineries where metal parts, including grinder blades and pneumatic ducting, are wearing out too early in the lifetime of the equipment. Repairing and replacing the equipment leads to unexpected equipment costs and the complete shutdown of the affected production lines.. It is believed that the ash content of the biomass is the likely cause of the wear on the metals. To address this ongoing problem, INL staff are analyzing the wear of metals caused by interactions with biomass . A sandblaster was modified to shoot ground biomass at metal coupons to simulate the wear that is occurring in the bio refineries. This system was able to test several variables including which biomass causes erosive and abrasive wear, impingement angle, particle densities of the biomass, and how the quantity of mass impacts the wear of the metals. Coupon mass loss after blasting was used to evaluate the wear caused by different biomass fractions. It was determined that the bark fraction of biomass caused the most wear and the whitewood fraction caused the least wear. Coupon mass loss in logging residues was found to be positively correlated with ash content, indicating that the ash content in the biomass is responsible for wear. It was also found that hand separated forest residues, sodium, aluminum and iron were positively correlated with wear, while silicon showed no correlation with wear.