Expectation vs. Reality [electronic resource] : The Unexpected Abrasive Nature of Biomass Feedstocks

 0 Người đánh giá. Xếp hạng trung bình 0

Tác giả:

Ngôn ngữ: eng

Ký hiệu phân loại: 664.7 Grains, other seeds, their derived products

Thông tin xuất bản: Washington, D.C. : Oak Ridge, Tenn. : United States. Dept. of Energy. Office of Energy Efficiency and Renewable Energy ; Distributed by the Office of Scientific and Technical Information, U.S. Dept. of Energy, 2018

Mô tả vật lý: Medium: ED : , digital, PDF file.

Bộ sưu tập: Metadata

ID: 264370

Early reports coming from stover-fed biorefineries have indicated that the feedstock is damaging equipment due to wear caused by the feedstock. It is suspected that biomass ash, both physiological and introduced ash, is responsible for the accelerated rates of wear being observed. Biomass ash can contain several different types of minerals, some of which are very hard. To simulate biomass wear on material handling equipment, a sandblaster was modified to shoot ground biomass at a metal coupon. The angle of impingement was set at 90�, 65.5�, or 45� by rotating the coupon. The coupon was weighed before and after shooting a known quantity of biomass to determine mass loss, and the surface characteristics of the blasted coupon were analyzed using laser microscopy. Coupon mass loss was positively correlated with ash content. Coupons blasted with loblolly pine (0.58% ash) lost 2.2mg�0.3mg per kg biomass shot, while high-ash stover (12.56% ash) coupons lost 104.7�2.1mg per kg biomass shot. Coupons blasted with NaOH leached low-ash stover (4.01% ash) lost 10.1�2.7mg per kg biomass shot. Decreasing the angle of impingement (90� to 45�) increased mass loss by about 17%. The concentrations of soil elements (silicon, aluminum, iron, titanium, sodium) were positively correlated with coupon mass loss, indicating that introduced ash is likely the primary source of wear to equipment. Future studies will identify mineral forms of ash present in biomass to further characterize biomass wear properties and to identify strategies to improve biomass quality.
Tạo bộ sưu tập với mã QR

THƯ VIỆN - TRƯỜNG ĐẠI HỌC CÔNG NGHỆ TP.HCM

ĐT: (028) 71010608 | Email: tt.thuvien@hutech.edu.vn

Copyright @2024 THƯ VIỆN HUTECH