Flash Pyrolysis of Oleaginous Biomass in a Fluidized-Bed Reactor [electronic resource]

 0 Người đánh giá. Xếp hạng trung bình 0

Tác giả:

Ngôn ngữ: eng

Ký hiệu phân loại: 666.9 Masonry adhesives

Thông tin xuất bản: Washington, D.C. : Oak Ridge, Tenn. : United States. Dept. of Energy. Office of Energy Efficiency and Renewable Energy ; Distributed by the Office of Scientific and Technical Information, U.S. Dept. of Energy, 2017

Mô tả vật lý: Size: p. 8326-8334 : , digital, PDF file.

Bộ sưu tập: Metadata

ID: 264451

In this study, flash pyrolysis was performed using milled soybean as a model substrate to assess the production of liquid fuels from oleaginous biomass feedstocks. A laboratory-scale fluidized-bed flash pyrolysis reactor that allowed rapid heat transfer to the biomass along with short vapor residence time was designed and constructed. Pyrolysis was performed between 250 and 610 �C with a vapor residence time between 0.2 and 0.3 s. At 550 �C or higher, nearly 70% of the initial feed mass as well as feed carbon was recovered in bio-oil. In addition, 90% of the feedstock lipids were recovered in the bio-oil at these pyrolysis conditions. The high liquid products yields were attributed to (1) the low secondary degradation of bio-oils due to the short vapor residence time and (2) the high recovery of liquids in a novel dry ice packed-bed condenser that provided a high surface area for condensation/aggregation of dilute bio-oil vapors/aerosols that were entrained in the carrier gas. The bio-oil from this study had higher C and H content, higher calorific value, and lower oxygen and water content than bio-oil from wood. Finally, these results show that high-quality bio-oil at high yield can be obtained from flash pyrolysis of oleaginous feedstock.
Tạo bộ sưu tập với mã QR

THƯ VIỆN - TRƯỜNG ĐẠI HỌC CÔNG NGHỆ TP.HCM

ĐT: (028) 71010608 | Email: tt.thuvien@hutech.edu.vn

Copyright @2020 THƯ VIỆN HUTECH