Rogue Mode Shileding in NSLS-II Multipole Vacuum Chambers [electronic resource]

• Ngôn ngữ: eng
• Ký hiệu phân loại: 621.3845 Electrical, magnetic, optical, communications, computer engineering; electronics, lighting
• Thông tin xuất bản: Upton, N.Y. : Oak Ridge, Tenn. : Brookhaven National Laboratory ; Distributed by the Office of Scientific and Technical Information, U.S. Dept. of Energy, 2011
• Mô tả vật lý: Medium: ED : , digital, PDF file.
• Bộ sưu tập: Metadata
• ID: 256921
• Chủ đề: 1. 43 particle accelerators; 2. Accelerators; 3. Design; 4. Dimensions; 5. Electric fields; 6. Et al; 7. Magnets; 8. Monitors; 9. Multipoles; 10. Pumping; 11. Shielding

Tóm tắt

Modes with transverse electric field (TE-modes) in the NSLS-II multipole vacuum chamber can be generated at frequencies above 450MHz due to its geometric dimensions. Since the NSLS-II BPM system monitors signals within 10 MHz band at RF frequency of 500 MHz, frequencies of higher-order modes (HOM) can be generated within the transmission band of the band pass filter. In order to avoid systematic errors in the NSLS-II BPM system, we introduced frequency shift of HOMs by using RF metal shielding located in the antechamber slot. We demonstrated numerical modeling and experimental studies of the spurious TE modes in the NSLS-II vacuum chambers with antechamber slot. Calculated frequencies of TE-modes in considered chambers with and without RF shielding were verified experimentally. Flexible BeCu RF shielding inside each chamber at proper location shifts frequencies of H{sub 10p}-modes above {approx}900MHz, except chambers S6 odd and even. These chambers need special attention because of synchrotron radiation from downstream magnets. S6 odd multipole vacuum chamber needs to be measured and the RF shielding length has to be optimized. RF shielding looks adequate for baseline design. Fifty percent of open space provides adequate pumping speed.